AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 307

Night Service
Console Display/Instructions
5 Save your entry.
Select Enter.
Procedure
Extensions
1 Specify the extension you want to assign to the Night Service group.
Night Serv Group xxxx:
Enter extension
Delete
Next
Backspace
Exit Enter
2 Assign or remove the extension(s) from the Night Service group.
Night Serv Group xxxx:
Enter extension
xxx
Delete
Next
Backspace
Exit Enter
Return to the System Programming menu.
3
Select Exit two times.
Additional Information
If you selected Extensions in Step 3, go to
Extensions Procedure.
If you selected Calling Grp in Step 3, go to
Calling Group Procedure.
xxxx = number entered in Step 4
If no DSS is attached:
SP:
"Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Then, go to Step 3.
On = extension assigned to group.
Off = extension not assigned to group.
xxxx = number entered in Step 4
Select Enter to assign or
Delete to remove your entry and
continue adding or removing extensions
from the Night Service group by
repeating Steps 1 and 2.
Select Next to save your entry and
begin assigning extensions to the next
Night Service group (operator position).
Common Administrative Procedures
PC
[ F10 ]
←
[ F10 ]
[ F8 ]
[ F9 ]
[ F5 ] [ F5 ]
3–185