AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 87

Using SPM
Table 2-2, Continued
[ Ctrl ] + [ F5 ]
[ Ctrl ] + [ F8 ]
[ Ctrl ] + [ F9 ]
[ Enter ↵ ]
[ Bksp ]
[ Del ]
↑ ↓
[ ] [ ]
[ ← ] [ → ]
n/a Reset. Reset the communications port. For
example, if the information on the screen is
garbled, try exiting from and then recentering
the screen. If the screen remains garbled, use
[ Ctrl ] + [ F5 ] to clear the screen and return to the
SPM Welcome screen. Note that using [ Ctrl ] +
[ F5 ] drops the modem connection.
n/a Browse. View print reports saved with Print
opts.
n/a Escape to shell. To use this key sequence, you
must set DEBUG= I in the SPM configuration file
ares. cfg. You can then use this key sequence to
execute DOS (or UNIX System) commands. To
return to SPM, type exit.
The [ Enter ↵ ] key on your PC can be used
Enter
instead of [ F10 ] when Enter appears as a choice
in the console simulation window.
The [ Bksp ] key on your PC can be used instead of
Backspace
[ F9 ] (Backspace) when it appears as a choice in
the console simulation window.
The [ Del ] key on your PC can be used instead of
Delete
[ F8 ] (Delete) when it appears as a choice
console simulation window.
The up, down, left, and right arrow keys can be
n/a
used to highlight selections in a menu and to
select the 20 line buttons below the console
simulation window.
in
2-19
Programming with SPM
the