AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 393

Lines and Trunks
Console Display/Instructions
4 Enter the QCC priority level ( n = 1 to 7 ).
QCC Priority
Enter queue priority
(1-7)
Backspace
Enter
Exit
Save your entry.
5
Select Enter.
6 Specify the QCC priority lines.
QCC Priority x:
Enter line/trunk number
_
Lines 01-20 Entry Mode
Lines 21-4O
–
Lines 41-6O
–
Lines 61-80
–
Exit
Single Line Procedure
1 Specify entry mode.
Select Entry Mode.
2 Enter the line or trunk with the specified queue priority.
QCC Priority X:
Enter line/trunk number
Delete
Next
Backspace
Enter
Exit
3 Assign or remove the line/trunk from the specified QCC priority level.
Select Enter or
Delete.
4 Continue to assign or remove lines or trunks, or go to Step 5.
Select Next.
Additional Information
Dial or type [n].
x = QCC queue priority entered in Step 4
For a single line, go to
Single Line Procedure.
For a block of lines, go to
Block Procedure.
Dial or type:
Trunk number [ nnn ]
Slot and port number * [ sspp ]
Logical lD number # [ nnn ].
You may continue to assignor remove the
QCC priority level from additional
lines/trunks by repeating Steps 2 and 3.
Return to Step 2. The next QCC priority
level will be displayed on Line 1.
Programming Procedures
PC
←
[ F10 ]
[ F6 ]
←
[ F10 ]
[ F8 ]
[ F9 ]
4-43