AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 493

PRI Facilities
AT&T Toll Procedure
Console Display/Instructions
1 Select an AT&T service for the B-channel group.
Dial Plan Rtg Entry xx:
Select one
Megacom 800 MegacomWATS
ACCUNET SDS LongDistnce
SoftDefNetw
MULTIQUEST Next
Exit Enter
2 Continue to assign the service to another routing entry or go to Step 3.
Select Next.
3 Save your entry.
Select Enter.
4 Program additional options by returning to Step 4 of the main procedure or go
to Step 5.
5 Return to the System Programming menu.
Select Exit three times.
Local Procedure
1 Select a service for the B-channel group.
Dial Plan Rtg Entry xx:
Select one
– INWATS
– 56/64 Digtl
–
VirtPrivNet
– OUTWATS Next
Exit Enter
2 Continue to assign the service to another routing entry or go to Step 3.
Select Next.
3 Save your entry.
Select Enter.
4 Program additional options by returning to Step 4 of the main procedure or go
to Step 5.
5 Return to the System Programming menu.
Select Exit three times.
Additional Information
xx = number entered in Step 5
Press the button or function key next to
your selection.
Return to Step 1. The next dial plan
routing entry will be displayed on Line 1.
xx = number entered in Step 5
Press the button or function key next to
your selection.
Return to Step 1. The next dial plan
routing entry will be displayed on Line 1.
Programming Procedures
PC
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
4–143