AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 498

PRI Facilities
Console Display/Instructions
Erase the current number of add digits ( nn ).
3
Dial Plan Rtg Entry xx:
Enter digits to add
nn
Next
Backspace
Exit
Enter
4 Enter the new number of digits to add ( nn ).
5 Continue to assign the add digits to another routing entry or go to Step 6.
Select Next.
6 Save your entry.
Select Enter.
Program additional options by returning to Step 4 of the main procedure or go
7
to Step 8.
Return to the System Programming menu.
8
Select Exit three times.
Outgoing Tables
PRI provides tables that work in conjunction with personal lines, pools, and ARS
tables to route calls. The following tables specify services for outgoing calls:
Call-by-Call. Selects an outgoing service, based on routing digits and
the bearer capability (voice, data, or both) of the calling extension. It
allows a single group of B-channels to carry a variety of services, such as
ACCUNET, SDN, and Megacom WATS.
Network Selection. Selects a long-distance carrier. Calls that match
Network Selection tables can be routed to a specific service by the Call-
by-Call tables.
Special Services. Selects services such as international dialing and
operator assistance. Calls that match these tables are not routed by the
Call-by-Call tables.
NOTE:
PRI tables that work with pools and ARS apply to Hybrid/PBX mode only.
4-144
Programming Procedures
Additional Information
xx = number entered in Step 1
Dial or type [ nn ].
Return to Step 3. The next dial plan
routing entry will be displayed on Line 1.
PC
[ Alt ] + [ P ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]