AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 246

Optional Group Calling Features
Group Coverage Receiver
Use this procedure to assign or remove a calling group as a receiver for a
coverage group.
Calling group member assignments must be made before you assign the group
as a receiver for a coverage group.
NOTE:
Integrated Administration uses calling group 30 as the default group to
cover AUDIX Voice Power.
Summary: Group Coverage Receiver
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Group Coverage Receiver
Console Display/Instructions
1
Select the Extensions menu.
System Programming
Make a selection
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
NightSrvce
Exit
3–124
Common Administrative Procedures
System manager, Integrated Administration
All
Not required
Form 7c, Group Coverage
Not applicable
Group numbers
Yes
No
Extensions → More → Grp Calling → Grp Coverage → Dial
calling group ext, no. → Enter → Dial coverage group no.
→ Enter → Exit → Exit → Exit
[ F6 ] → [ PgUp ] → [ F4 ] → [ F3 ] → Type calling group ext. no. →
Type coverage group no. → [ F10 ] → [ F5 ] → [ F5 ] → [ F5 ]
Additional Information
PC
[ F6 ]