AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 314

Night Service
Procedure: Night Service with Time Set
Console Display/Instructions
1 Select the Night Service menu.
System Programming:
Make a selection
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
NightSrvce
Exit
2 Select Night Service option.
Night Service:
Make a selection
GroupAssign Start
OutRestrict stop
Time Control
Emergency
ExcludeList
Exit
Add or Change Start Time Procedure
1 Erase the current start day and time ( xxxxx ) if assigned.
Night Serv Start:
Enter day (0-6) hr(00-23)
l
and min (O-59)
xxxxx
Backspace
Exit Enter
2 Enter a one-digit day of the week (Sunday= 0, Monday = 1, and so on), followed
by a four-digit time of day ( hh = 00 to 23, mm = 00 to 59 ).
3 Save your entry.
Select Enter.
Return to the System Programming menu.
4
Select Exit.
3–192
Common Administrative Procedures
Additional Information
To add or change start time, select
Start and go to Time
Add or Change Start Procedure.
–
–
To add or change stop time, select
–
Stop and go to
Add or Change Stop Time Procedure.
To Activate/deativate Night Service with Time
Control, select Time Control and go to
Activate/Deativate Night Service Procedure.
Press Drop.
Dial or type [ dhhmm ].
PC
[ F10 ]
[ F6 ]
[ F7 ]
[ F8 ]
[ Alt ] + [ P ]
←
[ F10 ]
[ F5 ]