AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 575

System Features
SMDR Account Code Format
For calls made using an authorization code, SMDR can be programmed to
either have the "home extension" or the actual authorization codes recorded in
the Account Code field if no Account Code is entered. Account Code overrides
the Authorization Code entry in the SMDR record when both features are used.
Summary: SMDR Account Code Format
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Inside Dial Tone
Use this procedure to set the inside (system) dial tone to be either different
from, or the same as, the outside line/trunk dial tone.
NOTE:
The inside dial tone must be the same as the outside dial tone when the internal
dial tone is not recognized by software applications or modems.
Summary: Inside Dial Tone
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 8a, System Features
Home Extension Number
Home Extension Number, Authorization Code
No
No
Options → SMDR → Auth Code → Home Extesnion Number or
Authorization Code → Enter → Exit → Exit
[ F7 ] → [ F8 ] → [ F6 ] → [ F1 ] or [ F2 ] → [ F10 ] → [ F5 ] → [ F5 ]
System manager
All
Not required
Form 8a, System Features
Inside dial tone is different from outside dial tone
Inside, Outside
No
No
Options → InsideDial → Inside or Outside → Enter → Exit
[ F7 ] → [ F9 ] → [ F1 ] or [ F2 ] → [ F10 ] → [ F5 ]
Programming Procedures
4-225