AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 599

Remote Access Features
A maximum of eight Allowed or Disallowed Lists can be assigned to each
barrier code. Class of restriction settings apply to individual barrier codes.
NOTE:
If barrier code requirements have not been established or have been removed
for remote access users, do not use this procedure. See "Remote Access
Without Barrier Codes. "
Summary: Remote Access with Barrier Codes
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Remote Access with Barrier Codes
Console Display/Instructions
1
Select the Lines and Trunks menu.
System Programming:
Make a selection
Extensions
System
SysRenumber Options
Operator Tables
LinesTrunks AuxEtpip
NightSrvce
Exit
System manager
All
Not required
Form 3a, Incoming Trunks: Remote Access
Call restrictions:
Barrier Code: outward restricted
All other barrier codes: unrestricted
ARS restriction level: 3
Unrestricted, Toll Restricted, Outward Restricted; 0 to 6
No
No
LinesTrunks → RemoteAccss → BarrierCode → Restriction
→ Dial barrier code no. → Enter → Select restriction →
Enter → ARS Restrict → Dial barrier code no. → Enter →
Drop → Dial FRL value → Enter → Allow List or Disallow
List → Dial barrier code no. → Enter → Dial list no. → Enter
→ Exit → Exit → Exit → Exit
[ F4 ] → [ F8 ] → [ F4 ] → [ F3 ] → Type barrier code no. → [ F10 ] →
Select restriction → [ F10 ] → [ F4 ] → Type barrier code no. →
[ F10 ] → [ Alt ] + [ P ] → Type FRL value → [ F10 ] → [ F6 ] or [ F7 ] → Dial
barrier code no. → [ F10 ] → [ F5 ] → [ F5 ] → [ F5 ] → [ F5 ]
Additional Information
>
Programming Procedures
PC
[ F4 ]
4-249