AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 467

PRI Facilities
Console Display/Instructions
8 Assign or remove the B-channel from the group.
Select Enter or
Delete.
Continue to assign B-channels to another group or go to Step 10.
9
Select Next.
10 Save your entry.
Select Enter.
11 Select Lines.
B-Channel Groups
Make a selection
B Channels IncomingRtg
Lines
NetworkServ
Copy Number
Exit
12 Enter the B-channel group number ( nn = 1 to 80 ).
B-Channel Groups:
Enter group number
Backspace
Exit Enter
13 Save your entry.
Select Enter.
14 Specify the line(s).
B-Channel Group xx:
Assign lines
Entry Mode
– Lines 01-20
- Lines 21-40
– Lines 41-60
– Lines 61-80
Exit
Additional Information
You may continue to assign or remove
additional B-channels from the group by
repeating Steps 7 and 8.
Return to Step 7. The next group will be
displayed on Line 1.
Dial or type [ nn ]
xx = number entered in Step 12
To select a single line, go to
Single Line Procedure.
To select a block of lines, go to
Block Procedure.
Programming Procedures
PC
[ F10 ]
[ F8 ]
[ F9 ]
[ F10 ]
[ F2 ]
←
[ F10 ]
4–117