AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 132

Basic System Operating Conditions
Set System Time
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports.
NOTE:
If you are planning to use the SMDR feature, make sure the system time is set
accurately. If you change the system time while the system is in Night Service
mode, Night Service is deactivated and must be manually reactivated. If you
have installed applications such as Call Management System (CMS) or AUDIX
®
Voice Power , you may need to set the time in the applications software
whenever you reset the system time.
Summary: Set System Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Set System Time
Console Display/Instructions
1 Select the System menu.
System Programming:
Make a selection
Extensions
System
SysRenumber Options
Tables
Operator
AuxEquip
LinesTrunks
Exit Night Srvce
3–10
Common Administrative Procedures
System manager
All
Not Required
Form 1, System Planning
0000
0000 to 2359
No
No
System → Time → Drop → Dial current time → Enter → Exit
[ F1 ] → [ F8 ] → [ Alt ] + [ P ] → Type current time → [ F10 ] → [ F5 ]
Additional Information
PC
[ F1 ]