AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 251

Optional Group Calling Features
Console Display/Instructions
9 Assign or remove the group or directory as overfiow backup coverage.
Select Enter or
Delete.
Erase the current number of calls ( nn ).
10
Group Calling xxxx:
Assign number of calls
Before overflow (1-99)
nn
Backspace
Enter
Exit
11 Enter the number of calls in the queue before the group is notified ( nn = 1 to 99 ).
12 Save your entry.
Select Enter.
13 Return to the System Programming menu.
Select Exit three times.
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal
messages.
Additional Information
You may continue to assign or remove
additional groups or directories as
overflow backup coverage by repeating
Steps 7 and 8.
If you do not want to change the current
number of calls, you have finished this
procedure. Go to Step 12.
xxxx = number entered in Step 5
Press Drop.
Dial or type [ nn ].
Common Administrative Procedures
PC
[ F10 ]
[ F8 ]
[ Alt ] + [ P ]
←
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
3–129