AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 439

Tie Trunks
Tie Trunk Answer Supervision Time
Use this procedure to specify the tie trunk answer supervision time in
milliseconds. This is the time limit for the called system to respond.
Summary: Tie Trunk Answer Supervision Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Tie Trunk Answer Supervision Time
Console Display/Instructions
1
Select the Lines and Trunks menu.
System Programming:
Make a selection
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
2 Select Tie Lines.
Lines and Trunks:
Make a selection
PRI
LS/GS/DS1
TIE Lines copy
TT/LS Disc RemoteAccss
DID Pools
Toll Type
Exit
System manager
All
Not required
Form 3c, Incoming Trunks: Tie
300 ms
20 to 4800 ms, in increments of 20 ms
No
Yes
LinesTrunks → TIE Lines → AnsSupvr → Dial trunk no. →
Enter → Drop → Dial no. of ms → Enter → Exit → Exit
[ F4 ] → [ F2 ] → [ F9 ] → Type trunk no. → [ F10 ] → [ Alt ] + [ P ] → Type
no. of ms → [ F10 ] → [ F5 ] → [ F5 ]
Additional Information
>
>
[ F4 ]
[ F2 ]
Programming Procedures
PC
4-89