AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 383

Lines and Trunks
Console Display/Instructions
2
Select Touch-Tone/Loop-Start Disconnect.
Lines and Trunks:
Make a selection
PRI
LS/GS/DSl
TIE Lines copy
RemoteAccss
TT/LS Disc
Pools
DID
Exit Toll Type
Select Loop-Start Disconnect.
3
TouchTone/LS Disconnect:
Make a selection
Outmode
LS Disconnect
Exit
4 Specify the disconnect signal as reliable or unreliable.
LS Reliable Disconnect:
Select one
Yes
–
– No
Exit Enter
5 Save your entry.
Select Enter.
6 Return to the System Programming menu.
Select Exit two times.
Toll Type
Use this procedure to specify whether users have to dial a toll prefix (1 or O)
before dialing an area code and telephone number. (Your local telephone
company should verify toll prefix requirements for each line/trunk. )
This setting is used by the system to classify calls as local or long distance so
that appropriate toll restrictions can be applied.
NOTE:
This option applies only to loop- and ground-start trunks; it does not apply to tie
trunks or DID trunks.
Additional Information
>
Select Yes or
No.
[ F3 ]
[ F2 ]
[ F10 ]
[ F5 ] [ F5 ]
Programming Procedures
PC
[ F1 ]
[ F2 ]
4-33