AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 616

Automatic Route Selection
Console Display/Instructions
3 Select Facility Restriction Level.
for Subpattern A or B.
ARS:
Make a selection
ARS l+7Dial SubA Absorb
Sub A Digit
ARS Input
Sub A Pools Sub B Start
– Sub B Stop
Sub A FRL
Sub B Pool
Exit
Subpattern A
1 Enter the table ( nn = 1 to 18 ) and the pool route ( m = 1 to 6 ) numbers.
Sub A Restriction Level:
Enter table (1-18). route
(1-6)
Backspace
Exit Enter
2 Save your entry.
Select Enter.
3 Enter the restriction level ( n = 0 to 6 ).
ARS Table xx Route x:
Enter restriction level
(0-6)
Backspace Next
Exit Enter
4 Continue to enter FRL for another pool route or go to Step 5.
Select Next.
5 Save your entry.
Select Enter.
6 Return to the System Programming menu.
Select Exit two times.
4-266
Programming Procedures
Additional Information
> Select Sub A FRL and go to
Subpattern A Procedure.
Press More select Sub B FRL, and go to
Subpattern B Procedure.
Procedure
Dial or type [ nnm ].
xx = table number entered in Step 1
x = route number entered in Step 1
Dial or type [n].
Return to Step 3. The next pool route
will be displayed on Line 1.
PC
[ F4 ]
[ PgUp ]
[ F1 ]
←
[ F10 ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]