AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 472

PRI Facilities
Miscellaneous Procedure
Console Display/Instructions
1 Specify a service.
B-Channel Group xx:
Select one
– Other
– CallByCall
Enter
Exit
2 Save your entry.
Select Enter.
Erase the current network service code
3
B-Channel Group xx:
Enter Net work Service
(5 digit code of 0 1)
7
nnnnn
Backspace
Exit Enter
4 Enter the five-digit network code that corresponds to the selected service.
5 Save your entry.
Select Enter.
Repeat Steps 5 through 7 of the main procedure for each miscellaneous service
6
group number.
7 Return to the System Programming menu.
Select Exit four times.
Copy Telephone Number to Send
Use this procedure to indicate whether or not the telephone number to send to
the network (for calls going out over ISDN lines assigned to a B-channel group)
is copied from the number assigned to that channel.
Select Do Not Copy Phone Number when a telephone number to send is
assigned to each channel in the B-channel group or when no telephone number
is to be sent to the network. In the latter case, make sure that there are no
telephone numbers assigned to any channels in the B-channel group by using
the "Telephone Number to Send" procedure.
4–122
Programming Procedures
Additional Information
xx = number entered in Step 5
If you select CallByCall, you have
finished this procedure. Go to Step 7
Select Other or
CallByCall.
xx = group number entered in Step 5
Select Drop.
Dial or type [ nnnnn ].
PC
[ F1 ]
[ F2 ]
[ F10 ]
[ Alt ] + [ P ]
←
[ F10 ]
[ F5 ] [ F5 ] [ F5 ] [ F5 ]