AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 106

Using SPM
2 Type the old {current) password. Do not press
Password
Enter Old Password
If you type the old password incorrectly, the bottom of the screen displays the
message Not Equal. Repeat Step 2. If you fail to enter the password correctly
after three attempts, the bottom of the screen displays the message Old
Password in Use and the procedure terminates. Press [ Enter ↵ ] to return to the
SPM Main Menu.
3 Type the new password (any five characters). Do not press
Password
Enter New Password
The password does not appear on the screen as you type it.
4 Type the new password again. Do not press
Password
Enter New Password again
New Password in use
5
Press [ F5 ] to return to the SPM Main Menu.
Print Options
The Print Opts option allows qualified service personnel to direct the output of
system programming reports either to the PC (where you can save them,
browse through them, or print them with the system programming Print option)
or to the SMDR printer.
2-38
Programming with SPM
[ Enter ↵ ].
[ Enter ↵ ].
[ Enter ↵ ].