AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 406

Lines and Trunks
Procedure: Copy Options for Lines and Trunks
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming:
Make a selection
System Extensions
Options
SysRenumber
Tables
Operator
LinesTrunks AuxEquip
NightSrvce
Exit
2 Select Copy.
Lines and Trunks:
Make a selection
LS/GS/DSL PRI
TIE Lines copy
RemoteAccss
TT/LS Disc
Pools
DID
Toll Type
Exit
3 Specify trunk(s).
Copy Trunks:
Make a selection
– Single
–
Block
Exit
Single Trunk Procedure
1 Enter the trunk number to copy from.
Copy Trunk Info From:
Enter trunk number
Backspace
Enter
Exit
2 Save your entry.
Select Enter.
4–56
Programming Procedures
Additional Information
>
>
To copy a single trunk,
select Single and go to
Single Trunk Procedure.
To copy a block of trunks,
select Block and go to
Block of Trunks Procedure.
Dial or type:
Trunk number [ nnn ]
Slot and port number * [ sspp ]
Logical ID number # [ nnn ].
lf youget the Station Busy message, wait
for an idle condition or exit system
programming and try again later.
PC
[ F4 ]
[ F7 ]
[ F1 ]
[ F2 ]
←
[ F10 ]