AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 109

Using SPM
2 Follow the instructions for a floppy or a hard disk.
A second window appears which displays the GOTO FLOPPY option and a
directory listing for C:\spm\backup.
If you are performing a Restore with a file saved on a floppy disk, go to
Step 3.
If you are performing a Restore with a file saved on the hard disk, go to
Step 4.
3 Use the arrow keys to highlight GOTO FLOPPY and press
Make a selection for
the RESTORE file.
If upgrading. convert
files before restoring.
Press ESC to Abort.
After you press [ Enter ↵ ], the GOTO FLOPPY statement shown above changes to
GOTO HARD DISK. Go to Step 5.
4 Specify the filmame to restore from.
To select the default backup filename, use the arrow keys to highlight
backup.ams and press [ Enter ↵ ].
If you used a different backup filename, use the arrow keys to select one
of the other filenames and press [ Enter ↵ ].
If the file you select is not in the same format as the communications
system, the screen below appears. Press [ Enter ↵ ] to return to the SPM
Main Menu. See "Convert" for details about converting a backup file.
File must be converted
before restoring.
Please press Enter
to see the main menu:
5 Observe the restore progress screen.
Press CTRL-F5 to Abort
Est. total time: xx min
filename
RESTORE IN PROGRESS
Blocks Sent Remaining
xxxx xxxx
To abort the restore press [ Ctrl ] + [ F5 ]. You return to the SPM Main Menu
[ Enter ↵
GOTO FLOPPY
backup.ams
file.1
file,2
xx = approximate number of minutes
filename = name entered in Step 5
xxxx = number of blocks
Programming with SPM
].
2-41