AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 476

PRI Facilities
Console Display/Instructions
3 Select B-Channel Groups.
PRI Lines:
Make a selection
Protocol
PhoneNumber
DialPlanRtg
B-ChannlGrp
NumbrToSend OutgoingTbl
Test TelNum
Exit
4 Select lncoming Routing.
B-Channel Groups:
Make a selection
IncomingRtg
B Channels
Lines
NetworkServ
Copy Number
Exit
Enter the B-channel group number ( nn = 1 to 80 ).
5
PRI Incoming Routing:
Enter group number
Backspace
Exit Enter
6 Save your entry.
Select Enter.
7
Specify the routing method to use for incoming calls.
B-Channel Group xx:
Select one
–
Routing by Dial Plan
–
Route by Line Appearance
Next
Enter
Exit
8 Continue to assign the routing method to another B-channel group or go
to Step 9.
Select Next.
4-126
Programming Procedures
Additional Information
Dial or type [ nn ]
xx = group number entered in Step 5
Select Routing by Dial Planer
Route by Line Appearance.
Return to Step 7. The next group will be
displayed on Line 1.
PC
[ F2 ]
[ F6 ]
←
[ F10 ]
[ F1 ]
[ F2 ]
[ F9 ]