AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 296

System Features
Console Display/Instructions
3 Select Recall Timer.
Options:
Make a selection
Unassigned Cover Delay
BehndSwitch Inter-Digit
RecallTimer
Rotary
Exit
4 Specify a timer setting.
Recall Timer:
Select one
– 350 ms
- 450 ms
- 650 ms
– 1 SeC
Exit Enter
5 Save your entry.
Select Enter.
6 Return to the System Programming menu.
Select Exit.
Inter-digit Timers
This procedure to program inter-digit timers has not yet been implemented. If
situations occur where a caller is attempting to make an outside call and.
becomes connected to an incoming call, the caller may not be able to put the
incoming call on hold or transfer the call. Setting inter-digit timers to shorter
times will permit the call to be put on hold or transferee. If you are experiencing
these types of problems, call the AT&T Helpline at 1800628-2888.
Allowed Lists
Use this procedure to establish Allowed Lists. These lists are telephone
numbers that can be dialed from specified telephones, regardless of any calling
restrictions that are assigned to the telephones.
A maximum of eight lists (numbered O through 7) with a maximum of 10
numbers each (numbered O through 9) are allowed. Each allowed number can
be no more than six digits (an area code plus an exchange) or six digits with a
leading 1, where required.
3–174
Common Administrative Procedures
Additional Information
Press the button or function key next to
your selection.
PC
[ F3 ]
←
[ F10 ]
[ F5 ]