AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 541

Optional Telephone Features
Authorization Code
Use this procedure to assign an authorization code to an extension. The
authorization code can range from 2 to 11 characters and must be unique for
each extension.
Summary: Authorization Codes
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Remote Call Forwarding
Use this procedure to allow or disallow the Remote Call Forwarding capability,
which allows users to forward calls to an outside number.
NOTE:
This feature is not recommended unless you have ground-start trunks. See
"Disconnect Signaling Reliability" and "Hold Disconnect Interval. "
System manager
All
Not required
Form 6h, Authorization Codes
Not assigned
2-11 characters (0 -9, *)
Yes
No
Extensions → More → Auth Code → Dial ext. no. → Enter →
Dial Authorization Code → Enter → Exit → Exit
[ F6 ] → [ PgUp ] → [ F9 ] → Type ext. no. → [ F10 ] → Type
authorization code → [ F10 ] → [ F5 ] → [ F5 ]
Programming Procedures
4–191