Access To System Programming From The Mlx-20; Console - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Access to System Programming
from the MLX-20 Console
Access to System Programming
from the MLX-20 Console
Follow the steps below to begin system programming. All of the procedures in
Chapter 3, "Common Administrative Procedures" and Chapter 4, "Programming
Procedures," begin at the System Programming menu shown in Step 4 of the
following procedure.
For information about accessing system programming through a PC with SPM,
see Chapter 2, "Programming with SPM. "
Console/Display Instructions
1 Display the Menu Mode (main menu) screen.
12/24 11:30
Kim
Anne
Andre Jorge
Jose Sarah
Show Number Next Page
2
Select System Programming.
MENU MODE: Select Feature
Press HOME to Exit
Directory
Messages
Posted Msg Sys Program
Alarm Clock Maintenance
Timer Ext Program
3 Display the System Programming menu.
System Set-up:
Review and Exit
Size: xxxx
Type: xxxx
Operator: xxxx xxxx
xxx xxxx xxxx xxxx
Exit
—
1–38
Programming Basics
Additional Information
Press Menu.
Ext Program does not appear on this
screen if the programming console is
a QCC.
—
On the System Set-up screen,
system information appears in place of
the x s.
Size = Small or Large
Type = Key, Hybrid/PBX, or Behind Switch
Operator = Position extension numbers
Select Exit.
PC