AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 572

System Features
Extension Status
Use this procedure to specify whether the Extension Status (ES) feature is used
in Hotel mode or Group Calling/Call Management System (CMS) mode.
The calling mode affects the meaning of the LEDs and the use of Auto Dial or
DSS buttons when the DLC operator position is in Extension Status mode.
In Hotel mode, telephones are restricted from making calls in Extension Status
states 1 and 2 (ES1 and ES2). In Group Calling/CMS mode, ES states reflect
member or agent status without restricting the telephones. In the Group
Calling/CMS mode, the Extension Status feature is used by the agents to log in
and out, and by the supervisor to see agent status.
Summary: Extension Status
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure Options → Ext Status → Hotel or GrpCall/CMS → Enter →
PC Procedure
SMDR Language
Use this procedure to change the language of the SMDR reports. It applies to
Releases 1.1, 2.0, 2.1 and 3.0 only. The default report language is the same as
that set for the system language. See '
4-222
Programming Procedures
System manager
All
Not required
Form 8a, System Features
Group Calling/CMS mode
Group Calling/CMS mode, Hotel mode
No
No
Exit
[ F7 ] → [ F7 ] → [ F1 ] or [ F2 ] → [ F10 ] → [ F5 ]
(
System Language. "