AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 623

Automatic Route Selection
Console Display/Instructions
9 Save your entry.
Select Enter.
10 Return to the System Programming menu.
Select Exit two times.
N11 Special Numbers Tables
Use this procedure to specify Facility Restriction Level (FRL) and/or digits that
must be added when emergency numbers in the N11 Special Numbers table
are dialed (for example, 411, 811, or 911).
Subpattern B, absorb, and pool routing cannot be programmed for the N11
Special Numbers tables.
Summary: N11 Special Numbers Tables
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
System manager
Hybrid/PBX
Not required
Form 3g, Automatic Route Selection Default and
SpecialNumbers Tables
Not applicable
Not applicable
No
No
To change Facility Restriction Level:
Tables → ARS → More → SpeclNumber → ARS FRL → Drop →
Dial FRL value → Enter → Exit → Exit → Exit
To program other digits:
Tables → ARS → More → SpeclNumber → ARS Digit → Drop
→ Dial digits → Enter → Exit → Exit → Exit
To change Facility Restriction Level:
[ F8 ] → [ F6 ] → [ PgUp ] → [ F4 ] → [ F1 ] → [ Alt ] + [ P ] → Type FRL value
→ [ F10 ] → [ F5 ] → [ F5 ]
To program other digits:
[ F8 ] → [ F6 ] → [ PgUp ] → [ F2 ] → [ Alt ] + [ P ] → Type digits →
[ F10 ] → [ F5 ] → [ F5 ]
Programming Procedures
PC
[ F10 ]
[ F5 ] [ F5 ]
4-273