Programming Needed After Upgrade To Release - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Upgrading the System
7 Program new features.
If you wish to use the factory defaults for the new features available with
Release 3.0, skip this step.
See Tables 2–7, 2–8 and 2-9 which follow this procedure
Table 2-7. Lists the features added with Release 1.1 of the
communications system.
Table 2-8. Lists the features added with Release 2.0 or 2.1 of the
communications system.
Table 2-9. Lists the features added with Release 3.0 of the
communications system.
When you upgrade from Release 2.0 or 2.1 to Release 3.0, you must
program these features as the last step of the upgrade procedure.
When you upgrade from Release 1.1 to Release 3.0, you must
program the features listed in Table 2–8, then the features listed in
Table 2-9.
When you upgrade from Release 1.0 to Release 3.0, you must first
program the features listed in Table 2-7, then the features listed in
Table 2-8, then the features listed in Table 2-9.
Table 2-7. Programming Needed after Upgrade to Release
Feature
System language
Extension language
SMDR language
Printer language
Sequence
SysProgram → More → Language → SystemLang
SysProgram → More → Language → Extensions
SysProgram → More → Language → SMDR
SysProgram → More → Language → Printer
1.1
2-51
Programming with SPM