AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 256

Optional Group Calling Features
Console Display/Instructions
6 Save your entry.
Select Enter
7 Erase the current number of calls ( nn ).
Group Calling xxxx:
Enter number calls
before alarm (1-99)
nn
Backspace Next
Exit Enter
8 Enter the number of calls to be in the queue before the alarm threshold
notification ( nn = 1 to 99 )
9 Save your entry.
Select Enter or
Next
10 Return to the system Programming menu.
Select Exit two times.
Group Calling External Alert for Calls-In-Queue
Alarm
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches the
programmed threshold.
Only one external alert device can be designated for each calling group. Since
the external alert signal is continuous, it is recommended that only light-type
external alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
3-134
Common Administrative Procedures
Additional Information
xxxx = number entered in Step 5
Press Drop.
Dial or type [ nn ].
Use Next program the next calling group.
Return to Step 7.
System manager
All
Not required
Form 7d, Group Calling
Not applicable
Extension number
PC
[ F10 ]
[ Alt ] [ P ]
←
[ F10 ]
[ F9 ]
[ F5 ][ F5 ]