AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 606

Automatic Route Selection
Console Display/Instructions
4 Specify whether 1 +7-dlgit dialing is required within the home area code.
1+7 Digit Dialing:
Select one
Within Area Code
Not within Area Code
Enter
Exit
5 Save your entry.
Select Enter.
Return to the System Programming menu.
6
Select Exit two times.
ARS Tables
Use this procedure for the following tasks:
To specify type of table (6-digit, area code, exchange,
or 1 + 7-digit number).
To add or change area codes to be included in each table.
To add or change exchanges to be included in each table.
A maximum of 16 tables can be established, numbered 1 through 16. Each
table can have a maximum of 100 entries, numbered 1 through 100. Tables 17
and 18, the Default Toll and Default Local tables respectively, cannot be
changed.
The first entry in a 6-digit table must be the area code. Subsequent entries
consist of exchanges within that area code.
Area code tables can contain only area codes.
Exchange and 1 + 7-digit tables can contain only exchanges.
The wildcard character (Pause) cannot be used to enter area codes or
exchanges in ARS tables.
4-256
Programming Procedures
Additional Information
Select Within Area Code or
Not within Area Code.
PC
[ F1 ]
[ F10 ]
[ F5 ] [ F5 ]