AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 475

PRI Facilities
Incoming Routing
Use this procedure to specify whether incoming routing is by line appearance
or according to dial plan. Dial Plan Routing is available in Hybrid/PBX mode
only.
Summary: Incoming Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Incoming Routing
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming:
Make a selection
System Extensions
SysRenumber Options
Operator Tables
AuxEquip
LinesTrunks
NightSrvce
Exit
2 Select PRI.
Lines and Trunks:
Make a selection
LS/GS/DSl PRI
TIE Lines copy
TT/LS Disc RemoteAccss
DID Pools
Exit Toll Type
System
manager
Line appearance Hybrid/PBX, Key; Dial Plan Routing:
Hybrid/PBX only
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Line appearance
Dial Plan Routing, Routing by Line Appearance
No
No
LinesTrunks → PRI → B-ChannlGrp → Incoming Rtg → Dial
B-channel group no. → Enter → Specify method of routing
→ Enter → Exit → Exit → Exit
[ F4 ] → [ F6 ] → [ F2 ] → [ F6 ] → Type B-channel group no. → [ F10 ]
→ Specify method of routing → [ F10 ] → [ F5 ] → [ F5 ] → [ F5 ]
Additional Information
>
Programming Procedures
PC
[ F4 ]
[ F6 ]
4–125