AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 565

Optional Group Calling Features
Group Type
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines
the type of voice messaging interface when the calling group is used to connect
voice messaging or automated attendant applications. The settings are listed
below.
Automatic Log Out. Used for calling groups to specify that the system
does not automatically log in calling group members after a power
failure. Calling group members must manually log themselves into the
group.
Automatic Log In. Used for calling groups that consist of fax machines
or data stations (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. This
setting can also be used for calling groups consisting of telephones.
Integrated VMI. Used when a voice messaging system that requires
special signaling for integrated operation (for example, AUDIX Voice
Power, IS 11/111, or MERLIN MAIL Voice Messaging System) is connected
to one or more extension jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
Generic VM. Used when a voice messaging system that does not need
special signaling (for example, AT&T Attendant) is connected to one or
more extension jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
Summary: Group Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 7d, Group Calling
Automatic Log Out
Automatic log in, Automatic log out, Integrated
VMl,Generic VMI
No
No
Extensions → More → Grp Calling → More → Group → Type
Dial calling group ext. no. → Enter → Specify login type →
Enter → Enter → Exit → Exit → Exit
[ F6 ] → [ PgUp ] → [ F4 ] → [ PgUp ] → Type calling group ext. no. →
Specify Iogin type → [ F10 ] → [ F5 ] → [ F5 ] → [ F5 ]
Programming Procedures
4–215