Show Ipv6 Ospf Range; Show Ipv6 Ospf Stub Table - Dell Networking 2024 Reference Manual

Metric Cost.................................... 1 (computed)
OSPF Mtu-ignore................................ Disable
OSPF cannot be initialized on this interface.

show ipv6 ospf range

Use the show ipv6 ospf range command in Privileged EXEC mode to display
information about the area ranges for the specified area identifier.
Syntax
show ipv6 ospf range
areaid — Identifies the OSPF area whose ranges are being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for area 1.
console#show ipv6 ospf range 1
Area ID IPv6 Prefix/Prefix Length
--------- -------------------------

show ipv6 ospf stub table

Use the show ipv6 ospf stub table command in Privileged EXEC mode to
display the OSPF stub table. The information below will only be displayed if
OSPF is initialized on the switch.
Syntax
show ipv6 ospf stub table
areaid
Lsdb Type
--------------- -------------
Advertisement
OSPFv3 Commands
1329