Step 1: Create The Subdomains; Step 2: Create The Subdomain Administrator; Step 3: Create The Viewing And Reporting Administrator - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
92
Create the subdomains.
Create the subdomain administrators.
Create the read-only customer administrator.
Log in as each administrator (for verification).

Step 1: Create the Subdomains

In this step, you create a subdomain for each company that uses the ISP.
Log in to the global domain as the super administrator.
1.
From the Menu bar, select Tools > Manage Administrators and Domains.
2.
Click the Subdomains tab, then click the Add icon to create a subdomain for the first
3.
customer. Configure the following four subdomains:
MA_company1
NH_company2
RI_company3
VT_company4
Click OK to save your changes.
4.

Step 2: Create the Subdomain Administrator

In this step, you create a subdomain administrator with full permissions for the domain.
Using the domain menu (at the top of the navigation tree), select the first subdomain
1.
(MA_company1). NSM loads the subdomain.
From the Menu bar, click Tools > Manage Administrators and Domains.
2.
In the Administrators tab, click the Add icon to create the primary administrator for
3.
this domain:
In the General Properties tab, enter a name, color, and contact information for the
administrator.
In the Authorization tab, leave the default authentication as Local and configure a
password for the administrator.
In the Permissions tab, click the Add icon, then configure the role as Domain
Administrator (predefined) and the Domain as MA_company1.
Click OK to save your changes.
4.
Repeat step 1 through step 4 for each subdomain.
5.

Step 3: Create the Viewing and Reporting Administrator

In this step, you create a custom role and administrator account that permits the ISP
customers to view log entries and generate reports for devices in their subdomain.
Copyright © 2010, Juniper Networks, Inc.