Copying A Configuration File From An Ftp Server To Flash Memory Devices - Cisco Catalyst 9500 Manual

Managing Configuration Files
Command or Action
Device# show flash:
Step 3 copy source-filesystem: [partition-number:][filename ]
dest-filesystem:[partition-number:][filename ]
Example:
Device# copy flash: usbflash0:
Example
The following example copies the file named running-config from partition 1 on internal flash memory
to partition 1 of usbflash0 on a device. In this example, the source partition is not specified, so the
device prompts for the partition number:
Device# copy flash: usbflash0:
System flash
Partition
1
2
[Type ?<no> for partition directory; ? for full directory; q to abort]
Which partition? [default = 1]
System flash directory, partition 1:
File
1
2
[3143728 bytes used, 1050576 available, 4194304 total]
usbflash0 flash directory:
File
1
2
[1712068 bytes used, 2482236 available, 4194304 total]
Source file name? running-config
Destination file name [running-config]?
Verifying checksum for 'running-config' (file # 2)...
Erase flash device before writing? [confirm]
Flash contains files. Are you sure you want to erase? [confirm]
Copy 'running-config' from flash: device
as 'running-config' into usbflash0: device WITH erase? [yes/no] yes
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased!
[OK - 850/4194304 bytes]
Flash device copy took 00:00:30 [hh:mm:ss]
Verifying checksum...

Copying a Configuration File from an FTP Server to Flash Memory Devices

To copy a configuration file from an FTP server to a flash memory device, complete the task in this section:
Size Used
4096K 3070K
16384K 1671K 14712K
Length Name/status
3142748 dirt/network/mars-test/c3600-j-mz.latest
850 running-config
Length Name/status
1711088 dirt/gate/c3600-i-mz
850 running-config
OK (0x16)
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Copying a Configuration File from an FTP Server to Flash Memory Devices
Purpose
Copies a configuration file between flash memory devices.
• The source device and the destination device cannot
be the same. For example, the copy usbflash0:
usbflash0: command is invalid.
Free Bank-Size State
1025K 4096K Read/Write
8192K Read/Write
Copy Mode
Direct
Direct
OK
205