Disabling Vtp Version 2 - Cisco WS-C2948G-GE-TX Configuration Manual

Configuring VTP Version 1 and Version 2
This example shows how to enable VTP version 2 and verify the configuration:
Console> (enable) set vtp version 2
This command will enable VTP version 2 function in the entire management domain.
All devices in the management domain should be version2-capable before enabling.
Do you want to continue (y/n) [n]? y
VTP domain server modified
Console> (enable) show vtp domain
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- -----------
VLAN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)

Disabling VTP Version 2

To disable VTP version 2, perform this task in privileged mode:
Task
Step 1 Disable VTP version 2.
Step 2
Verify that VTP version 2 is disabled.
This example shows how to disable VTP version 2:
Console> (enable) set vtp version 1
This command will enable VTP version 1 function in the entire management domain.
Warning: trbrf & trcrf vlans will not work properly in this version.
Do you want to continue (y/n) [n]? y
VTP domain Lab_Network modified
Console> (enable) show vtp domain
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- -----------
VLAN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
9-10
: running VTP2 (VTP3 capable)
: Lab_Network
Mode Revision
Off 0
: disabled
: running VTP1 (VTP3 capable)
: Lab_Network
Mode Revision
Off 0
: disabled
Password : configured (hidden)
Updater ID: 172.20.52.19
Command
set vtp version 1
show vtp domain
Password : configured (hidden)
Updater ID: 172.20.52.19
Chapter 9 Configuring VTP
78-15908-01