Disabling Vtp (Vtp Transparent Mode) - Cisco 4500M Software Manual

Chapter 27 Understanding and Configuring VTP
This example shows how to verify the configuration:
Switch# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Configuration last modified by 0.0.0.0 at 8-12-99 15:04:49
Switch#

Disabling VTP (VTP Transparent Mode)

To disable VTP on the Catalyst 4500 series switch, perform this task:
Command
Step 1
Switch# configuration terminal
Step 2
Switch(config)# [no] vtp mode transparent
Step 3
Switch(config)# end
Step 4
Switch# show vtp status
This example shows how to disable VTP on the switch:
Switch# configuration terminal
Switch(config)# vtp transparent
Setting device to VTP mode.
Switch(config)# end
Switch#
This example shows how to verify the configuration:
Switch# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Configuration last modified by 0.0.0.0 at 8-12-99 15:04:49
Switch#
OL-6696-01
: 2
: 247
: 33
: Client
: Lab_Network
: Enabled
: Disabled
: Disabled
: 0x45 0x52 0xB6 0xFD 0x63 0xC8 0x49 0x80
Purpose
Enters configuration mode.
Disables VTP on the switch.Use the no keyword to return
to the default setting (server mode).
Exits configuration mode.
Verifies the configuration.
: 2
: 247
: 33
: Transparent
: Lab_Network
: Enabled
: Disabled
: Disabled
: 0x45 0x52 0xB6 0xFD 0x63 0xC8 0x49 0x80
Software Configuration Guide—Release 12.2(25)EW
Configuring VTP
27-9