Computer Name Sync - Nortel Call Center Server Installation And Maintenance Manual

Using server utilities

Computer Name Sync

Introduction
If you change the computer name after installing the Symposium Call Center
Server, use this utility to synchronize the Symposium Call Center Server name
and the current computer name. This utility also verifies if the DNS Host Name
matches the new computer name and notifies you if the two names are different.
Also, this utility changes the database name to match the new computer name.
Note: To change the computer names in a warm standby configuration, you need
to remove the active and standby servers from a warm standby mode, change the
computer names, and then reactivate the warm standby mode.
If you perform a computer name sync, you also need to configure Symposium
Web Client by running the ChngSrvrSOAP utility. See the Symposium Web
Client Guide for more details.
Computer name restrictions
The new computer name must be a single word without spaces, 6 to 15
characters long. Letters, numbers, and underscores are allowed. Spaces,
hyphens, and dashes are not allowed.
To change the computer name
To change the computer name, you must first change the name on the operating
system, and then use the Computer Name Sync utility to synchronize the new
computer name with the Symposium Call Center Server name.
From the Windows Start menu, select Settings ➝ Control Panel ➝ System.
1
2 Change the computer name.
3 Click OK.
Result: The system prompts you to restart the server.
4 Click Yes.
Result: The server restarts.
1094
Standard 7.02
Symposium Call Center Server