Nortel Call Center Server Installation And Maintenance Manual page 1250

Using Symposium Standby Server
Step 10. Copy the latest Service Update to the Replication Server
ATTENTION
Before you install the Replication Server software, copy the latest Service
Update pack for Replication Server to drive D on your server.
Note: Do not install the Service Update pack! The installation program will
install the Service Update automatically during the installation of the server
software.
Service Update packs are included on the Supplementary CD shipped with your
software. However, you should check for a more recent Service Update pack on
the Enterprise Solutions PEP Library at http://www.nortelnetworks.com/espl.
To copy the latest Service Update to the Replication Server
Insert the Supplementary CD.
1
Note: If you are installing from a remote CD or a network drive, map the CD
to a drive letter on the server.
Navigate to the Supplementary CD or the shared drive and copy the
2
Service Update (for example NN_REPS_0500_SU_02_S.msi) to the root of
the server's drive D.
Notes:
Service updates for the Replication Server begin with the letters
NN_REPS.
Make sure you do not skip this step.
Step 11. Install the Replication Server software on the Replication
Server
To install the Replication Server software on the Replication Server
To use the Replication Server CD and its installation programs, you must run the
Setup.exe program.
1250
After completing the migration to the Standby Server,
do not add Desktop users to the Active Server until
you have installed and configured the Replication
Server.
Standard 7.02
Symposium Call Center Server