Nortel Call Center Server Installation And Maintenance Manual page 1231

July 2007
Performing a new installation of Windows 2000
Step
6 Verify that
the SNMP
service is
installed.
7 Verify that
the IIS
service is not
installed.
Installation and Maintenance Guide for Windows 2003
Details
Ensure that the Simple Network Management Protocol (SNMP)
service is installed. If not, install it.
TIP:
From the Start menu, choose Settings ➝ Control Panel.
1
2 Double-click Add/Remove Programs.
3 Click Add/Remove Windows Components to view a list of
the installed components.
4 Select Management and Monitoring Tools, and then click
Details.
5 Make sure the check box beside SNMP is checked. If it is
checked, then SNMP is installed.
6 Click OK to return to the Add/Remove Windows
Components property page.
Although you must install SNMP, you do not need to configure
SNMP. However, if desired, you can choose to configure the
SNMP service to forward traps to your Network Management
System. For details, see "Configuring SNMP on the server" on
page 989.
Ensure that Internet Information Services (IIS) is not installed. If
it is installed, remove it.
TIP:
On the Add/Remove Windows Components property page,
make sure that the check box beside Internet Information
Services is not checked.
Using Symposium Standby Server
✔
1231