Nortel Call Center Server Installation And Maintenance Manual page 1214

Using Symposium Standby Server
equipment log (records the model and serial number of the system, all
installed options, and other information)
Microsoft Windows Server 2000 CD-ROM
ATTENTION
latest Windows Server 2000 service pack that has been validated with
Symposium Call Center Server. You can obtain this information from the
Symposium Service Packs and Security Hotfixes Compatibility List
(available on the Partner Information Center web site)
pcAnywhere software version 11.0.1—supplied (provides remote access by
Nortel service)
Hardware platforms
Symposium Standby Server Release 5.0 supports hardware that meets the
minimum requirements as described in "Hardware specifications" on page 1215
of this chapter, regardless of the manufacturer. The Symposium Call Center
Server must also meet the requirements of Microsoft's Hardware Compatibility
List for the applicable Windows Server 2000 operating system. See Microsoft's
web site for details.
Platform Compliance Check
To check whether a particular server meets these basic requirements for Platform
Vendor Independence, run the Preinstallation Compliancy Checker utility on
that server after the operating system is installed and the drives are partitioned
according to the specifications in this chapter. This utility is included on the
Server Application CD. It generates warnings and suggestions when the server
under test does not satisfy the minimum or suggested requirement.
Note: The Preinstallation Compliancy Checker utility does not check all
requirements for Platform Vendor Independence. You must ensure that the
server meets all requirements in "Hardware specifications" on page 1215.
Nortel platforms no longer supported
You cannot use any Nortel platforms for Release 5.0 of Symposium Standby
Server because they cannot meet the minimum requirements for Platform
Vendor Independence. These servers include:
1214
The Replication Server only runs on Windows Server 2000.
Do not install Replication Server on Windows Server 2003.
Standard 7.02
Symposium Call Center Server