Nortel Call Center Server Installation And Maintenance Manual page 1227

July 2007
Performing a new installation of Windows 2000
Step
2 Start the
Windows
2000 Server
installation
3 Complete the
Windows
2000 Setup
wizard
Installing
Devices window
Regional Settings
window
Personalize Your
Software window
Your Product
Key window
Licensing Modes
window
Computer Name
and
Administrator
Password
window
Installation and Maintenance Guide for Windows 2003
Details
Start the installation of Windows 2000 Server according to the
instructions supplied with the operating system. Follow the on-
screen instructions to create a partition for the operating
system. This partition must reside on drive C of your server on
an NTFS partition.
Setup copies the operating system files to the installation folders
on the new partition. When the copy process is complete, the
system restarts. The Windows 2000 Setup wizard appears.
Use the following guidelines in this table to complete the
Windows 2000 Setup wizard.
Setup detects and installs devices automatically.
Do not change the Regional Options control panel setting for
Language for non-Unicode Programs.
Complete this window as required for your site.
Complete this window as required for your site.
Nortel Networks recommends that you use the "Per server"
licensing mode and that you have a minimum of five concurrent
connections. This is the default.
Type the computer name and administrator password.
Note: Pay close attention to the naming rules for the computer
name. It must be 6–15 characters in length. First character must
be alphabetical. Letters, numbers, and underscores are allowed.
No spaces, hyphens, or dashes are allowed. The name must be
unique on the network.
Using Symposium Standby Server
✔
1227