Nortel Call Center Server Installation And Maintenance Manual page 1302

Command
execute transaction
Result: The connection is resumed.
Database logon information on the Active and the Standby servers do
not match
If the database logon information on the Active and the Standby servers do not
match, an error message may appear when you re-configured the Replication
Server. This issue is caused when the desktop users were added while the
Replication Server was offline. Perform the following tasks:
1 Configure the Replication Server.
2 When the Replication Server is running, take the Replication Server offline.
3 Add the desktop users to the Active server, and then re-configure the
Replication Server.
1302
Description
If the failed transaction is required,
use the execute transaction option.
The Replication Server will attempt to
execute the transaction again.
For example, if your server is called
SBYSERVER and your database is
BLUE, the command you enter is:
1> resume connection to
SBYSERVER.blue execute
transaction
2> go
Symposium Call Center Server