Nortel Call Center Server Installation And Maintenance Manual page 1064

Restoring data
4 Click the Utilities tab.
Result: The following window appears:
5 In the Import Configuration Data from file section, make sure that the path
displayed is the correct location of your file MigInfo.txt. If the path is not
correct, use Browse to navigate to the location of the file.
6 When the path shown is correct, click Import.
Result: The system imports your configuration data.
7 Complete steps 9 through 20 in the procedure "To configure your server's
software and database by importing configuration data from the Platform
Recovery Disk" on page 1081. Then continue to the following procedure.
To check that the server's services start up successfully
From the Start menu, choose Programs ➝ Symposium Call Center Server ➝
System Monitor.
Result: The SMonW window appears and Symposium Call Center Server
services begin the startup process. The services take approximately 15 to 20
minutes to start up. For more information about the services and their statuses,
see "Troubleshooting problems with Symposium Call Center Server services" on
page 1174.
1064
Standard 7.02
Symposium Call Center Server