Nortel Call Center Server Installation And Maintenance Manual page 1081

July 2007
Configuring your system's software and database by importing
configuration data from the Platform Recovery Disk
The file MigInfo.txt on your Platform Recovery Disk contains all configuration
data for your Symposium Call Center Server. To configure your server software
and database, you can import this information directly into the Server Setup
Configuration Utility using a command, as described in the following procedure.
To configure your server's software and database by importing
configuration data from the Platform Recovery Disk
1 Make sure you are logged on to the server as Administrator or NGenSys.
2 Do one of the following:
If your Platform Recovery Disk is on a floppy disk, insert it into the floppy
drive.
If your Platform Recovery Disk is in a remote directory, map a network
drive to the remote directory.
3 From the Start menu, choose Run.
4 Do one of the following
If your Platform Recovery Disk is on a floppy disk, type
d:\nortel\iccm\bin\svrconfig.exe -i -w a:\MigInfo.txt.
If your Platform Recovery Disk is in a remote directory, type
d:\nortel\iccm\bin\svrconfig.exe -i -w x:\MigInfo.txt,
where x is the letter of the mapped remote directory.
Installation and Maintenance Guide for Windows 2003
Restoring data
1081