Nortel Call Center Server Installation And Maintenance Manual page 1287

July 2007
Stopping the replication process
In most situations, you stop the replication process by removing the servers from
the Warm Standby Configuration. However, if the Replication Server fails or if
the network connection to the Replication Server is disrupted, you may not be
able to stop the replication process using the Remove Warm Standby
Configuration method. In this situation, perform the following procedure to stop
the replication process.
.
To stop the replication process
On the Active Server, select Start → Run.
1
Type d:\nortel\iccm\bin\wsstoprep.exe.
2
Click OK.
3
Result: The following message appears:
Installation and Maintenance Guide for Windows 2003
CAUTION
Risk of failure
You can only run this utility on the Active Server.
Using Symposium Standby Server
1287