Configuration (Nbconfig) - Nortel Call Center Server Installation And Maintenance Manual

July 2007

Configuration (Nbconfig)

Introduction
Use the Configuration utility (Nbconfig) to perform the following task:
Add sites at the Network Control Center (NCC) (see page 1100).
Note: To perform these tasks, you must start the Configuration utility with the
admin access level. For more information, see "To start the Configuration utility
with the admin access level" on page 1097.
Access levels
There are two access levels available in the Configuration utility—regular and
admin. Based on the access level with which you open the Configuration utility,
you can perform different actions. With the regular access level, you cannot edit
any settings as all information is read-only. In the admin access level, you can
make changes to the server settings.
To start the Configuration utility with the regular access level
From the Windows Start menu, choose Programs ➝ Symposium Call Center
Server ➝ Configuration
Result: The Nbconfig window appears with the following three tabs:
Local Machine Settings
Address Table
Site Table
To start the Configuration utility with the admin access level
1 From the Windows Start menu, choose Run
2 Type nbconfig -admin, and then click OK.
Result: The Nbconfig window opens with the admin access level.
Installation and Maintenance Guide for Windows 2003
.
Using server utilities
.
1097