Upgrading from Release 4.2 to 5.0 on a new server
c. Click OK.
To save the Platform Recovery Disk to a remote directory:
a. Map a network drive to the remote directory.
b. Click Browse, and then navigate to the mapped network drive.
c. Select the drive, and then click OK.
d. Click Create Disk.
11
Wait until the following message appears:
12
Click OK.
Result: The Platform Recovery Disk created successfully message
appears.
13
If you used a floppy disk, remove it from the drive. Make sure the Platform
Recovery Disk is labeled appropriately and stored in a safe place.
740
Note: The name of the remote directory into which you save the
Platform Recovery Disk must not contain any spaces. Spaces in
the remote directory name cause errors.
Result: The system creates the Platform Recovery Disk.
Standard 7.02
Symposium Call Center Server