Nortel Call Center Server Installation And Maintenance Manual page 1154

Installing and configuring Real-time Statistics Multicast
3 Click Apply.
Tip: You must also use the controller utility's Apply button to activate
changes to multicast rates made in the configuration utility. See "To activate
a multicast rate modification" on page 1157 for more information.
4 Click Close.
5 To activate new RSM settings on Symposium Call Center Server (with the
exception of the multicast rates), stop and start the Statistical Data
Propagator (SDP) service.
Modifying IP multicast settings on Symposium Call Center Server
Perform the following steps to modify the multicast IP settings in Symposium
Call Center Server.
ATTENTION
1154
Nortel highly recommends that you review the
documentation for each of the RSM-dependent
applications that use the RSM service in Symposium Call
Center Server before modifying RSM's IP multicast
settings.
Standard 7.02
Symposium Call Center Server