Nortel Call Center Server Installation And Maintenance Manual page 1086

Restoring data
To save the Platform Recovery Disk to a remote directory:
a. Click Browse and navigate to the directory in which you want to store
b. Select the directory, and then click OK.
c. Click Create Disk.
Result: The system creates the Platform Recovery Disk.
15 Wait until the following message appears:
16 Click OK.
17 If you used a floppy disk, remove it from the drive. Make sure the Platform
Recovery Disk is labeled appropriately and stored in a safe place.
18 Click OK to close the Symposium Call Center Server Setup Configuration
Utility window.
Result: The following message appears:
19 Click OK.
Result: The system automatically restarts.
1086
the data.
Note: The name of the remote directory into which you save the
Platform Recovery Disk must not contain any spaces. Spaces in
the remote directory name cause errors.
Result: The path you selected appears to the left of the Browse
button.
Standard 7.02
Symposium Call Center Server