Nortel Call Center Server Installation And Maintenance Manual page 1235

July 2007
Performing a new installation of Windows 2000
Step
13 Install any
additional
drivers
required for
your
hardware
configuration.
14 Test the
network
connection.
15 Install the
Windows
2000
service pack.
16 Update the
emergency
repair disk.
Step 8. Make sure the computer name and DNS host name on the
Replication Server match
Once you have installed the operating system, you must make sure that your
server's computer name and DNS host name match exactly, including uppercase
and lowercase letters. If these names do not match, you cannot install the
Symposium Standby Server database software.
Installation and Maintenance Guide for Windows 2003
Details
If your server requires any additional drivers for your hardware
configuration, install them.
Use the ping command to test the CLAN network connection.
Install the latest Windows 2000 service pack that has been
validated with Symposium Standby Server. You can obtain this
information from the Symposium Service Packs and Security
Hotfixes Compatibility List (Available on the Partner Information
Center web site).
Nortel Networks recommends that you restart the computer and
update the emergency repair disk to record the latest
configuration data for the server. Do this every time you change
the server configuration (for example, if you change the
computer name or IP address).
TIP:
From the Start menu, choose Programs ➝ Accessories ➝
1
System Tools ➝ Backup.
2 On the Welcome tab, click Emergency Repair Disk.
3 Follow the on-screen instructions.
Using Symposium Standby Server
✔
1235