Nortel Call Center Server Installation And Maintenance Manual page 1230

Using Symposium Standby Server
Performing a new installation of Windows 2000
Step
Workgroup or
Computer
Domain window
5 Log on to
Windows
2000.
1230
Details
To install on a domain
1 Select "Yes, make this computer a member of the following
domain."
2 Enter the domain name for your site.
3 Enter your user name and password.
Note: Do not configure the Replication Server as a Domain
controller. Add the server as a member of a domain.
To install on a workgroup
1 Select "No, this computer is not on a network, or is on a
network without a domain."
2 In the "Workgroup or computer domain" box type the
workgroup name.
Once the Windows 2000 Setup wizard completes the
installation of the operating system, you must configure the
operating system for before installing Symposium Standby
Server. Remove the boot disk or CD-ROM.
When logging on to Windows 2000 for the first time, the
Windows 2000 Configure Your Server wizard appears. This
causes the Windows 2000 Configure Your Server wizard to
appear. This wizard is not necessary for Symposium Standby
Server functionality.
TIP:
1 In the first window, select I will configure this server later.
2 Click Next.
3 Uncheck Show this screen on startup.
4 Close the window to save your changes.
Standard 7.02
Symposium Call Center Server
✔